Configure a static IP Address to Konica Minolta 4000P

Note: The printer should be connected to a network or to a print server and navigate either to the Network card menu or TCP/IP menu.

Network Card menu

To access this menu, navigate to the following:

Network/Ports >Standard Network >STD NET SETUP >Network Card

TCP/IP menu

To access this menu, navigate to the following:

Network/Ports >Standard Network >STD NET SETUP >TCP/IP>IP address

Note: This menu is available only in network printers or printers connected to print servers

Then enter the appropriate values for

IP address, Network Mask, Default gateway.

Advertisements

Color lines in photocopy on Kinoca Minolta C368

After Installing a new Konica Minolt C368 printer, you may realize that everything seems to work very fine except for one thing. When you make a photocopy it comes with colored lines across the page either in blue or magenta color. At first you may think it design or kind of a great option to have a ruled paper. However this is not true. It is simply a wake up call and a sign that some setting regarding date is not right.

You can solve this issue by following the Procedure below.
1. Call the service Mode to the screen
2. After calling the service mode, Press the following keys in this order
Stop > 1 > 1 > 4 > 4 > Clear

3. Enter time zone year, month, day, hour, and minute in that order, from 10-key pad

Note
Before entering date and time, touch clear to delete the present time from the place where data and time is entered
Wen setting the month, day, hour, or minute, enter  “0” first if the data one digit
Make sure that the correct value has been entered, then touch [Entry] and then [Apply]
After the confirmation screen appears, touch [OK]

The above is true on all Konica Minolta color MFPs